2018-04-17
The automatic oil mist lubrication system independently developed by Chuangjia has successfully solved all the defects of traditional automatic refueling and has been improved in function. 1: After the oil is atomized, the core part is directly sprayed through the high-pressure air flow, which is accurate and in place. Lubricate not only to the shuttle liner and chute, but also to the shuttle shaft through which the oil mist passes. 2: The amount of oil is controllable and adjustable through electronic control, precise control will never throw oil, and will not cause oil stains on the fabric, machine, and ground. 3: Every 2-3 heads are a group of refueling units. When refueling, the units are controlled by the computer to work in sequence in groups to ensure that each head is refueled evenly and uniformly, and is completely independent of the number of heads.
2018-04-17
The disadvantages of traditional refueling
The disadvantages of traditional automatic refueling: 1: refueling is not in place. The traditional refueling method cannot directly add oil to the core part of the rotary shuttle liner and chute. 2: refueling flow can not be precisely controlled. Too much will be thrown into the fabric, machinery, ground pollution. 3: The distribution of refueling is uneven. From the head to the tail of each head distribution is not in place, there is too much oil in the organic head, too little oil in the organic head, and even some heads will not produce oil. The more heads, the greater the problem. 4: oil leakage. Aging of the filler pipe joint or installation problems will cause long-term oil leakage, which will directly cause the function to be unable to use. 5: Blockage. The oil stored in the oil pipe and the oil tank for a long time will change
Telephone
/ TEL
Address
/ ADD
No.17, Maoyang Road, Jiyang Street, Zhuji City, Zhejiang Province
Contact Us：
Looking forward to your call at any time