Chuangjia Characteristics of oil mist


our automatic oiling system has solved all the problems completely.
 
1Add oil in the form of oil mist by high pressure gas ,lubrated all the main parts.
 
2The addition of the oil can be controlled by computer.
 
3Every 2 or 3 heads make a group of oiling units. When they are add oil, they are controlled by computers, arranged in groups and arranged sequentially, so as to ensure that each head is oiling well proportionally, and is completely unaffected by the number of heads.
 
4The oil is in the oil pot if not start the system. no oil in the pipe at all.usually add oil only need 2-3s , so very very little oil will be leaked out if the pipe is broken.
 
5Oil mist is transferred by high pressure, so it can dredge the pipeline.
 
Technology advantage:Each head is oiling well proportionally by high pressure gas. You can set the the time、quality and frequency by computer. This system also have dust removal function . 
 
 

Related News


On the occasion of the Spring Festival, I wish all new and old customers a happy, happy and long, long career and good luck in the Year of the Pig!

On the occasion of the Spring Festival, I wish all new and old customers a happy, happy and long, long career and good luck in the Year of the Pig!


Chuangjia Oil Mist Features

The automatic oil mist lubrication system independently developed by Chuangjia has successfully solved all the defects of traditional automatic refueling and has been improved in function. 1: After the oil is atomized, the core part is directly sprayed through the high-pressure air flow, which is accurate and in place. Lubricate not only to the shuttle liner and chute, but also to the shuttle shaft through which the oil mist passes. 2: The amount of oil is controllable and adjustable through electronic control, precise control will never throw oil, and will not cause oil stains on the fabric, machine, and ground. 3: Every 2-3 heads are a group of refueling units. When refueling, the units are controlled by the computer to work in sequence in groups to ensure that each head is refueled evenly and uniformly, and is completely independent of the number of heads.


The disadvantages of traditional refueling

The disadvantages of traditional automatic refueling: 1: refueling is not in place. The traditional refueling method cannot directly add oil to the core part of the rotary shuttle liner and chute. 2: refueling flow can not be precisely controlled. Too much will be thrown into the fabric, machinery, ground pollution. 3: The distribution of refueling is uneven. From the head to the tail of each head distribution is not in place, there is too much oil in the organic head, too little oil in the organic head, and even some heads will not produce oil. The more heads, the greater the problem. 4: oil leakage. Aging of the filler pipe joint or installation problems will cause long-term oil leakage, which will directly cause the function to be unable to use. 5: Blockage. The oil stored in the oil pipe and the oil tank for a long time will change